Ships All over the World Order Today !!     EAS Activate MKIII -   Used to Clear and Read the Range Rover MKIII EAS Stored faults. (2003-2005)   198.95 USD + (Shipping)    Before Ordering Please check the Last 8 digits of your VIN.  Only MKIII Range Rover Vehicles up to 5A999999 Will Work.  If your VIN is below this number, then you are good to go.

• The EASActivate MKIII is a small portable handheld device that enables the user to reset the Range Rover Electronic Air Suspension (EAS) computer. This device is designed to reset the "Air Susp Inactive" warning message that appears on the Range Rover Dash Display. The device is powered solely by the cars own OBDII interface port and requires no further user interaction. Once the device is plugged into the OBDII port, communication is established with the EAS and the reset commands are sent out automatically.

Range Rover MKIII - EAS Activate V1 USB

• In addition to reseting the EAS fault, the EAS Activate MKIII will also read the stored EAS fault codes. After the user has finished resetting the EAS computer, the EAS diagnostic trouble shooting codes are stored internally on the EAS Activate MKIII. The EAS fault codes can be retrieved by simply plugging the EAS Activate MKIII into a Windows PC USB port. Once the EAS Activate MKIII is plugged into a Windows PC USB port, the retrieved EAS Fault codes can be read in plain english and can be used to further troubleshoot the Range Rover EAS.

• The EAS Activate MKIII is extremely easy to use and requires little or no computer or mechanical experience on the part of the user. The device can be kept with the vehicle as a emergency off road repair tool. Anyone of any age or any level of technological aptness can operate this device. Simply plug the unit in, let the unit clear the EAS fault and unplug when done. It could not be simpler.

• The EAS warning lights have illuminated because of an underlying reason. There is always a reason for the fault. Sometimes the fault condition has occurred because of a simple transient and temporary sensor problem. In these cases, when the fault is cleared, the fault may not return because nothing with the system is actually broken. While unfortunately sometimes the faults can be triggered because something is actually physically broken with the system. In these cases, then physical problem must be repaired to prevent the fault code from returning. In both cases, the EAS Activate Tool will help you diagnose the problem and determine if expensive repairs are needed or if just a reset of the system is needed. The reading and clearing of EAS fault codes is not always the fianl repair step but is a required step on the path to repairing your EAS system.

  • 
    Orders will be accepted through Paypal only. All shipments are sent through the USPS. Orders doemstic to the United States will be a flat postage rate of 10 USD. International shipping will be a flat rate of 26 USD. Delivery times will vary depending on where you are in the world. Typical international delivery times are 6-10 business days. Although this may vary if customs officials are involved. So please be patient.

  
  If you require overnight or express international shipping, different shipping methods can be choosen at checkout.
  Thanks,
  Storey Wilson
  This e-mail address is being protected from spambots. You need JavaScript enabled to view it
  
  

  ---

  < Prev		Next >