P38a EAS - Air Dryer

eas_dryer_front

 

eas_dryer_scaled

 

The EAS Dryer is an essential and often overlooked EAS component. The primary function of the EAS dryer is to absorb moisture from the compressed air in the EAS system. A potentially bad situation could arrise if moisture contained within the compressed air froze or corroded metalic components. This is not a huge issue for drier climates but the vehicle was designed in the United Kingdom and I hear it gets wet there sometimes.

The EAS Dryer is connected to the high pressure tank through a Non-return check valve and the oring fittings should be checked when hunting down slow leaks.

 


The information provided herewith is on "AS IS" basis without warranties of any kind either express or implied. RSW Solutions nor any affiliate guarantee the completeness, usefulness or accuracy of any information provided herewith either related to RSW Solutions LLC or any of the links that are referenced from this Web site. However, the information provided herewith is purely intended for your reference and information and does not express, nor intend to provide any opinion or advice or endorsement of any kind to the services provided by the organizations referenced in this Web site. Your use of this Web site (www.RSWsolutions.com) is at YOUR RISK. IN NO EVENT SHALL RSW Solutions LLC, OR ITS affiliates BE LIABLE FOR ANY LOSS OR INJURY OR DAMAGES, either direct, indirect, punitive, incidental, special incidental, or otherwise, resulting from or connected to the use of the www.RSWsolutions.com web site. YOU HEREBY WAIVE ANY AND ALL CLAIMS AGAINST RSW Solutions ARISING OUT OF YOUR USE OF THE SITE OR ANY OTHER INFORMATION PROVIDED ON THIS SITE (www.RSWsolutions.com).

Disclaimer: Land Rover, Range Rover and Rover are registered trademarks of Land Rover North America, Inc.. This website has no affiliation with Land Rover North America, Inc.